Cart 0
Cart 0



Systor 1 to 3 M.2 NVMe/SATA Duplicator & Sanitizer - up to 18GB/Min - for PCIe M2, 2.5" & 3.5" HDD & SSD Drives (SYSNVME-XW303)

Systor 1 to 3 M.2 NVMe/SATA Duplicator & Sanitizer - up to 18GB/Min - for PCIe M2, 2.5" & 3.5" HDD & SSD Drives (SYSNVME-XW303)

£5,020.00
* LEAD TIME: 12-17 BUSINESS DAYS

2 YEAR WARRANTY for all Systor duplicators

FLEXIBLE CROSS INTERFACE DUPLICATION

Automatically detect NVMe and/or SATA signals to easily copy devices from one interface to another, such as:
  • M.2 (SATA) to M.2 (NVMe)
  • M.2 (NVMe) to HDD/SSD (SATA)
  • HDD/SSD (SATA) to M.2 (NVMe)
  • HDD/SSD (SATA) to HDD/SSD (SATA)


SUPPORTED DEVICES

  • NVMe M.2
  • SATA M.2
  • SATA 3.5" HDD
  • SATA 2.5" HDD
  • SATA 2.5" SSD


AUTOMATIC REJECTION OF SLOW DEVICES

Users can set the duplicator's minimum writing speed threshold to prevent/eliminate problematic devices that slow down the duplication and sanitization process.

INTELLIGENT DUPLICATION
(COPY MODES)

Systems and Files
(Quick Copy Mode):
Copies only the data area and skips empty space, reducing the copy duration time.

 All Partitions:
Can be set to copy or skip HPA, DCO, unknown partitions, modified formats, etc.
Whole Media:
Copies from the initial sector to the end, bit-by-bit. There are no format limitations in this mode. Supports all systems and proprietary formats, along with various brands.

 Percentage Copy:
Set a selected percentage of source/master capacity to copy.

SKIP BAD SECTORS

Select the numbers of bad sectors to skip from the source drive (ranging from 0 to unlimited) during copy, compare, or erase functions.

SANITIZATION METHODS
(ERASE MODES)

Quick Erase:
Erases the device's index table, and only takes a few seconds to complete.

 Full Erase:
Erases the entire device
DoD Erase:
Complies with the erasure standards of the U.S. Department of Defense
(DoD) 5220.22-M.

 Secure Erase:
Complies with standards of the National Institute of Standards and Technology
(NIST) 800-88.

COMPARE FUNCTION + CRC CHECKSUM

Performs bit-by-bit comparison with CRC (cyclic redundancy check) to detect errors in order to ensure accuracy of copied data.
After each duplication session, the user simply checks whether the CRC value displayed on the LCD screen is identical.

 

PRODUCT FEATURES
Features
 Descriptions
Operation Type
  • Stand-alone, FPGA-based design (no PC required)
Controller Design
  • Embedded controller is designed to support capacities over 18TB+.
  • Constant improvement supports latest market-available devices.
Devices Supported
  • Automatically detect NVMe and/or SATA signals to easily copy devices from one interface to another, such as:
    • M.2 (SATA) to M.2 (NVMe)
    • M.2 (NVMe) to HDD/SSD (SATA)
    • HDD/SSD (SATA) to M.2 (NVMe)
    • HDD/SSD (SATA) to HDD/SSD (SATA)
Hot Swap Supported
  • Supports hot swapping of devices.
Bandwidth Performance
  • Peak transfer speeds up to 18GB/min. (300MB/sec.)
  • Actual performance is dependent on media transfer speeds.
  • Dedicated bandwidth enables high-volume replications without speed degradation.
Read-Only Or Eraseable Source Port
  • Built-in feature. Enables/disables source media to be erased/sanitized during erase process.
Modular Port Design
  • Replace ports easily to reduce downtime and for cost-effective long-term usage.

 

PRODUCT FUNCTIONS
Features
 Descriptions
Copy Modes
  • System and Files (Quick Copy Mode):
    Copies data and skips empty space. Only supports Windows, Mac, and Linux.
  • All Partitions:
    Set to copy or skip HPA, DCO, unknown partitions, modified formats, etc.
  • Whole Media:
    Copies from the initial sector to the end, bit-by-bit. No format limitations. Supports all systems and proprietary formats, along with various brands.
  • Percentage Copy:
    Set a selected percentage of source/master capacity to copy.
Compare (Verification)
  • Performs bit-by-bit comparison with CRC (cyclic redundancy check) to detect errors and ensure accuracy of copied data from source device to target device(s).
Sanitization Modes
  • Quick Erase:
    Erases device index table.
  • Full Erase:
    Erases entire device(s), in compliance with the NIST 800-88 standard.
  • DoD Erase:
    Erases entire device(s), in compliance with the DoD 5220.22-M standard.
  • DoD EraseComp:
    Erases entire device(s) and verifies complete erasure, in compliance with the DoD 5220.22-M standard.
  • Secure Erase:
    Erases non-loadable areas, in compliance with the NIST 800-88 standard.
Skip Bad Sectors
  • Set number of bad sectors to skip during Copy/Compare/Erase.

 

PRODUCT COMPATIBILITIES
Compatibilities
 Descriptions
Compatible Devices
  • NGFF (M.2): 2230, 2242, 2260, 2280, 3030, 3042, 3060, and 3080.
  • Supports B+M Key or M Key only
  • mSATA
  • SATA HDD/SSD
Supported Formats
  • Quick Copy Function: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX).
  • Whole Device Copy Function: All Formats, including proprietary formats.
  • GPT, MBR, and Advanced Formats.
Supported O/S
  • All (Windows, Mac, Linux, and other proprietary systems).

 

PRODUCT SPECIFICATIONS
Specifications
 Descriptions
LCD Display
  • Backlit Monochrome LCD Display
LEDs
  • 3 LED Indicators per Port:
  • Yellow (Power), Green (Pass), and Red (Fail)
Control Panel
  • 4 Push Buttons (▲, ▼, OK, ESC)
Power Requirements
  • AC 100~240 V
Operational Temperature
  • 0°C ~ 60°C (32°F ~ 140°F)
Non-operational Temperature
  • -20°C ~85°C (-4°F ~ 185°F)
Humidity
  • Operating: 20% ~ 80%, non-condensing
  • Non-operating: 5% ~ 95%, non-condensing
Packaging Dimensions (L×W×H)
  • 24 in. x 18 in. x 16 in.
Product Weight
  • 19.4 lbs.
Certifications
  • FCC, CE, and RoHS
ISO/IEC
  • 27037, 27041, 27042, 27043, and 27050

* Specifications are subject to change without notice.

Share this Product